Low Li ion diffusion barrier on low-crystalline FeOOH nanosheets and high performance of energy storage

Nano Research - To obtain symmetric supercapacitors (SCs) with high energy density, it is critical to fabricate an electrode with wide potential window and excellent capacitive performance. Herein,...     

Gel Polymer Electrolyte with Anion‐Trapping Boron Moieties via One‐Step Synthesis for Symmetrical Supercapacitors

A novel gel polymer electrolyte (GPE) which is based on new synthesized boron‐containing monomer, benzyl methacrylate, 1 m LiClO₄/N,N‐dimethylformamidel liquid electrolyte solution is prepared through a one‐step synthesis method. The boron‐containing GPE (B‐GPE) not only displays excellent mechanical behavior, favorable thermal stability, but also exhibits an outstanding ionic conductivity of 2.33 mS cm^?1 at room temperature owing to the presence of anion‐trapping boron sites. The lithium ion transference in this gel polymer film at ambient temperature is 0.60. Furthermore, the symmetrical supercapacitor which is fabricated with B‐GPE as electrolyte and reduced graphene oxide as electrode demonstrates a broad potential window of 2.3 V. The specific capacitance of symmetrical B‐GPE supercapacitors retains 90% after 3000 charge–discharge cycles at current density of 1 A g^?1.     

内插螺旋立式上行管流场及传热性能的实验研究

通过粒子图像测速流场实验与传热实验相结合，研究了内插螺旋立式上行管的螺旋节距、丝径、中径比等结构参数在不同Re下对流场、阻力及传热性能的影响。结果表明，内插螺旋能够有效扰动和混合管内流体，使管内形成多个纵向旋涡的流体结构、增大管壁附近液体涡量，有利于强化传热。当Re相同时，管内平均流速v、Nu和综合换热性能PEC均随丝径增大而增大，随中径比减小而增大；随节距增大，3种参数均出现增大的趋势，节距大于20 mm后开始减小。管内流体的阻力f随丝径和节距增大而减小，随中径比增大而增大。综合比较，在较低Re时，节距p=20 mm、丝径e=1.6 mm、中径比D/d=0.75时综合传热效果最好。     

彩色轮胎的生产工艺及设计要点

介绍不同工艺的彩色轮胎，总结白胎侧和半彩轮胎的工艺、结构及配方设计要点。彩色轮胎改变了传统轮胎以单一黑色为主的状况，让轮胎颜色更加丰富；传统黑色轮胎的配方设计时只需考虑原材料对胶料性能的影响，彩色轮胎进行配方设计时则需同时兼顾原材料对胶料性能的影响。     

Genetic algorithm to simultaneously optimise stope sequencing and equipment dispatching in underground short-term mine planning under time uncertainty

ABSTRACT

The main issue in short-term planning optimisation for underground mining is organising the mining process with limited resources in the form of equipment and materials to satisfy production targets and stable feed grade requirements. In this paper, an integrated optimisation model is proposed based on an individual generation algorithm and an improved Genetic Algorithm to simultaneously optimise stope extraction sequencing and timing, extracted ore grade and equipment dispatching. The model objectives are to shorten the time gap between the stope mining processes and the overall working time. When the uncertainty of equipment working time is taken into account in a short-term scheduling model, the Monte Carlo simulation is applied to evaluate the risk of not meeting the production target. A modification strategy is defined to evaluate equipment failure. Consequently, any available equipment is automatically reassigned to the mining site to replace the broken-down equipment. A case study is used to validate the model in the Sanshandao gold mine of China to formulate an optimal monthly schedule. Compared with the conventional approach, the new model could reduce the variance of ore tonnage and feed grade and improve the equipment allocation efficiency. Discussions are presented to address the uncertainty.     

不同改良措施对排土场土壤微形态影响的试验研究

以铁矿排土场废石土为研究对象,自制模型试验装置,设计4种基质改良方法,开展SEM检测实验,并应用IPP软件对SEM照片进行定量化分析,研究在不同改良措施下对铁矿排土场土壤微结构的影响。结果表明：单施3%有机肥土壤孔隙度为16%,与对照组排土场原矿土相比增加了60%。复合施用3%有机肥、掺拌30%的黄土的处理孔隙度达到最大33%。单施3%有机肥、5%有机肥对土壤大团聚体含量皆有显著的促进作用,复合施有机肥、掺拌黄土的处理与单施有机肥的处理对比,土壤大团聚体含量增加并不显著。各改良措施的MWD与FMD均随着土壤中大团聚体的含量增加而增加。     

An efficient approach for multi-user multi-cloud service composition in human–land sustainable computational systems

The Journal of Supercomputing - The increasing social problems on population, resources and environment enable the interaction between nature and humanity to become one of the most active research...     

Study on depositing SiO2 nanoparticles on the surface of jute fiber via hydrothermal method and its reinforced polypropylene composites

To improve the interfacial compatibility of jute fiber reinforced polypropylene (PP) composites, hydrothermal method was used to deposit SiO₂ nanoparticles on the surface of pretreated jute fibers and the effect of reaction factors (tetraethoxysilane [TEOS] concentration, ammonia concentration, and reaction temperature) on the deposition of SiO₂ nanoparticles were evaluated. The results of FTIR, XRD, SEM, and TEM showed that the amorphous SiO₂ nanoparticles with an average particle size of 65.0 nm were successfully deposited on the surface of jute fibers at the TEOS/H₂O volume ratio of 1:2, ammonia of 0.55 M, reaction temperature of 100 °C (0.15 MPa) for 5 h. Compared with the sol–gel method, SiO₂ nanoparticles obtained by the hydrothermal method possessed smaller particle size and were less agglomerated, which can better fill in the surface defects of the jute fibers and result in a 12.9% increase in the tensile strength. The study on the mechanical properties and interface performance of the jute fiber reinforced PP composites indicated that the interfacial compatibility between jute fibers and PP was obviously improved. The tensile and impact strength of the composites reinforced with nano‐SiO₂ deposited jute fibers were increased by 26.87% and 25.65%, respectively, compared with the untreated jute fibers. J. VINYL ADDIT. TECHNOL., 26:43–54, 2020. © 2019 Society of Plastics Engineers     

铁矿排土场不同基质改良方法下生态修复效果评价

开展4种铁矿排土场基质改良方法的现场修复实验；进行修复后的土壤理化性质、肥力性质、重金属污染特征，以及植被生长指标检测；确定了排土场生态修复效果的评价因子；利用灰色理论关联度分析法确定权重；根据各评价因子的指数进行统计学加权计算，最终得出生态修复效果评价指数。结果表明：40%粒径-5 mm排土场原矿土+60%黄土+刺槐的组合对排土场生态修复具有较好的效果，优于其它修复组合。建立的生态修复效果评价方法，较全面考虑了多种土壤和植被指标因素，对现场生态修复工程具有良好的借鉴和参考价值。